Power Control Switch: Two full/half/quarter power switches to provide seven basic power settings. Arc proof.

Combined/Ratio Output Switch: One switch lets you toggle between Symmetrical and Asymmetrical routing of the “A” and “B” flash head outlet banks. Arc proof.

Variator Control: Two f/stop variator allows you to fine-tune your basic power settings in 2/10 stop increments. When used with the power control switches, it provides numerous a 6 f/stop range,

Power / Modeling Light Control: Three positions – On/Model On, Power Off, or On/Model Off.

Flash Head Outlets: Three Arc protected so you can plug and unplug flash head cables without shutting down the power pack.

Ready Light Test Switch: This low profile button serves as a flash test switch and signals 100% flash readiness.

Audible Ready Indicator: 100% recycle indicator with its own ON/ OFF switch for applications that demand it.

Sync Input Socket/Built In Wein Slave Eye: Switch between standard mono plug sync cord, or trigger remotely with the built in Wein Slave Eye, which responds consistently to other flash sources or infrared triggering. ISO approved low voltage sync circuit.

	RP500 4.6 lb/2.09 kg 5 7/8” x 6 7/8” x 1/8” 149mm x 175mm x 155mm
RP500 SPECIFICATIONS TOTAL POWER 500 w/s RECYCLE TIME TO FULL POWER, SECONDS 1.6 AVERAGE POWER CONSUMPTION, AMPS 7 FLASH CONSISTENCY, F-STOP 1/10 FLASH DURATION, SECONDS full power single head 1/1000 FLASH DURATION, SECONDS minimum power 2 heads 1/4500 SYNC VOLTAGE, VOLTS 10 F/STOP RANGE 5

 

RP1000 5.9 lb/2.67 kg 5 7/8” x 6 7/8” x 6 3/4” h 149mm x 175mm x 171.5mm h
RP1000 SPECIFICATIONS TOTAL POWER 1000 w/s RECYCLE TIME TO FULL POWER, SECONDS 1.4 AVERAGE POWER CONSUMPTION, AMPS 14 FLASH CONSISTENCY, F-STOP 1/10 FLASH DURATION, SECONDS full power single head 1/600 FLASH DURATION, SECONDS minimum power 2 heads 1/4200 SYNC VOLTAGE, VOLTS 10 F/STOP RANGE 5

RH1050
This 1000 w/s head is convection cooled with a 150w model lamp. Small and efficient, its 140 degree fixed reflector fills an umbrella and sweeps a background perfectly. Many accessories are available. And it has a 16’ attached head cable. It weighs only 2.0 lb/0.9 kg

MH2050 Fan Cooled
	Fan cooled and 2000 w/s capable, with a 250w model lamp. Not much bigger than the RH1050, it uses all the same accessories – it’s a real workhorse preferred by hard working pros. 18’ detached head cable. It weighs only 2.4 lb/1.1 kg

RB1000 Bare Tube
	Weighing a mere 1.3 lb/0.6 kg makes the RB1000 ideal as a location or studio compact light source. The RB1000 comes with a pigtail cable design that can be used with any length Dynalite head extension cable. Uses snap on modules to attach reflectors and colored gels. Built in 1/4-20 threaded socket also accommodates Lowel Tilter or Bogen mini-ball.

Road Kits

Click on the Model Number below to view a Kit:

KIT MODEL	POWER PACK	POWER CABLE	15’ SYNC CORD	RH1050 FLASH HEADS W/CABLES	6.5’ LIGHT STANDS	40” UMBRELLAS	CARRY CASE
RK5-1100	RP500	1	1	1	0	0	0674LW
RKP-1200	RP500	1	1	2	0	0	0674LW
RK5-1222	RP500	1	1	2	2	2	0670LW
RK5-2303	(2) RP500	2	2	2	2	2	0671LW
RK10-1222	RP1000	1	1	3	0	3	0670LW
RK10-2303	(2) RP1000	2	2	3	0	3	0671LW