Built In Pocket Wizard™ Receiver: Digital radio circuitry allows you to eliminate sync cords and wirelessly synchronize any number of power packs with high consistency, sensitivity and broad range – even on bright outdoor sets. You can trigger from any Pocket Wizard transmitter or SekonicTM meter with transmitter.

Power Control Switch: Two full/half/quarter power switches to provide seven basic power settings. Arc proof.

Combined/Ratio Output Switch: One switch lets you toggle between Symmetrical and Asymmetrical routing of the “A” and “B” flash head outlet banks. LED indicates combined mode. Arc proof.

All Channel Dimmer: Two f/stop variator fine-tunes power settings on all heads simultaneously, in 2/10 stop increments. Used in conjunction with the Power Control Switches the pack has a full 6 f/stop range.

Modeling Light Control: Dual proportional dimmer slide switch control includes FULL OFF so that the cooling fan may continue to run.

Flash Head Outlets: Four Arc protected so you can plug and unplug flash head cables without shutting down the power pack.

Ready Light Test Switch: This low profile button serves as a flash test switch and signals 100% flash readiness.

Audible Ready Indicator: 100% recycle indicator with its own ON/OFF switch for applications that demand it.

Sync Input Socket :Choose standard mono plug sync cord, Wein Slave Eye (responds consistently to other flashes or infrared triggering) or Pocket WizardTM Receiver. ISO approved low voltage sync circuit.

	MP500 4.6 lb/2.08 kg 5 7/8” x 6 7/8” x 6 1/8” 149mm x 175mm x 155mm
MP500 SPECIFICATIONS TOTAL POWER 500 w/s RECYCLE TIME TO FULL POWER, SECONDS 1.6 AVERAGE POWER CONSUMPTION, AMPS 10 FLASH CONSISTENCY, F-STOP 1/10 FLASH DURATION, SECONDS full power single head 1/1000 FLASH DURATION, SECONDS minimum power 2 heads 1/4500 SYNC VOLTAGE, VOLTS 10 F/STOP RANGE 6

MP1000 5.9 lb/2.67 kg 5 7/8” x 6 7/8” x 6 3/4” h 149mm x 175mm x 171.5mm h
MP1000 SPECIFICATIONS TOTAL POWER 1000 w/s RECYCLE TIME TO FULL POWER, SECONDS 1.4 AVERAGE POWER CONSUMPTION, AMPS 14 FLASH CONSISTENCY, F-STOP 1/10 FLASH DURATION, SECONDS full power single head 1/600 FLASH DURATION, SECONDS minimum power 2 heads 1/4200 SYNC VOLTAGE, VOLTS 10 F/STOP RANGE 6

RH1050
This 1000 w/s head is convection cooled with a 150w model lamp. Small and efficient, its 140 degree fixed reflector fills an umbrella and sweeps a background perfectly. Many accessories are available. And it has a 16’ attached head cable. It weighs only 2.0 lb/0.9 kg

MH2050 Fan Cooled
	Fan cooled and 2000 w/s capable, with a 250w model lamp. Not much bigger than the RH1050, it uses all the same accessories – it’s a real workhorse preferred by hard working pros. 18’ detached head cable. It weighs only 2.4 lb/1.1 kg

RB1000 Bare Tube
	Weighing a mere 1.3 lb/0.6 kg makes the RB1000 ideal as a location or studio compact light source. The RB1000 comes with a pigtail cable design that can be used with any length Dynalite head extension cable. Uses snap on modules to attach reflectors and colored gels. Built in 1/4-20 threaded socket also accommodates Lowel Tilter or Bogen mini-ball.

Roadmax Kits

Click on the Model Number below to view a Kit:

KIT MODEL	POWER PACK	POWER CABLE	15’ SYNC CORD	MH2050 FLASH HEADS W/CABLES	6.5’ LIGHT STANDS	40” UMBRELLAS	CARRY CASE
MK5-1222	MP500	1	1	2	2	2	0670LW
MK5-2303	(2) MP500	2	2	3	0	3	0671LW
MK10-1222	MP1000	1	1	2	2	2	0670LW
MK10-2303	(2) MP1000	2	2	3	0	3	0671LW